The 12-hour student pilot was flying the helicopter following repair to the chain drive oil system. The throttle was advanced to 100 percent power while the helicopter was resting on the ground. The helicopter was aligned into the wind. The pilot moved the cyclic to the far right stop during run-up. The helicopter tipped to the right, the wind "caught the aircraft," and the main rotors came in contact with the ground. The helicopter then rolled over, resulting in substantial damage. The pilot reported that the winds were from the south at 15 knots with gusts to 20 knots. The recorded wind, at an airport located approximately 10 miles northeast of the accident site, about the time of the accident, was from 280 degrees at 11 knots, gusting to 19 knots.