No fatalities

Runway Excursion During Landing Roll

Addison, TX, United States

On March 26, 2016, a ROCKWELL INTERNATIONAL 114 B was involved in an aviation accident near Addison, TX. No fatalities were reported. Investigators recorded the probable cause as: The private pilot's failure to maintain directional control during the landing roll and the flight instructor's delayed remedial action, which resulted in a runway excursion, collision with an airport sign, and a nose gear collapse. This summary draws on records from NTSB; 12 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 2026-09-03Data APIEditorial standards

A flight instructor and student pilot experienced uncommanded right yaw during landing roll, causing the aircraft to veer off the runway, strike a sign, and collapse the nose gear. A jack rabbit was found nearby.

Incident Overview During the landing roll, the flight instructor reported that the airplane began an uncommanded yaw to the right. The private pilot receiving instruction stated, “I can't control the yaw.” The instructor applied rudder pressure to correct the yaw, but the airplane veered off the runway to the right. The left wing collided with an airport sign, and the nose gear collapsed. ## Wildlife and Damage A jack rabbit was found in the runway excursion path, and blood was observed on the left main landing gear door. According to a Federal Aviation Administration Aviation Safety Inspector who traveled to the site, the jack rabbit was not hit on the runway surface; it was found in the grass adjacent to the runway. The left wing was substantially damaged. ## Mechanical Condition The flight instructor and the pilot receiving instruction did not report any mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Contributing factors

Directional control — Not attained/maintainedStudent/instructed pilotInstructor/check pilot