What aircraft was involved and where did it happen?

The accident on 1988-03-22 involved a Bellanca 7GCAA, registration N8929, at Greeley, CO.

Tail Wheel Chatter Precedes Ground Loop During Touch-and-Go Practice (N8929)

On March 22, 1988, a Bellanca 7GCAA (registration N8929) was involved in an aviation accident near Greeley, CO. This summary draws on records from the U.S. National Transportation Safety Board (NTSB) historical archive.

During touch-and-go practice, the pilot reported a tail wheel chatter on touchdown followed by swerving. Right rudder and brake inputs did not prevent a ground loop that damaged the left main gear and collapsed the tail wheel.

Accident Summary

During a practice session of touch-and-go landings, a certified flight instructor (CFI) rated pilot and a CFI rated passenger were on board. The pilot reported that the winds were light and variable at the time of the accident.

Sequence of Events

On the last touchdown, the tail wheel chattered and the aircraft swerved to the left. The pilot applied some right rudder, which did not correct the swerve. The pilot then applied the right brake. Subsequently, the aircraft swerved to the right and control was lost. The aircraft ground looped to the right.

Damage

The ground loop resulted in damage to the left main landing gear and the collapse of the tail wheel. No information about injuries was provided in the source.

Additional Information

The source does not specify the aircraft type, registration, date, operator, location, or number of occupants beyond the two CFI rated individuals. No ATC involvement was mentioned.

1988-03-22: Bellanca 7GCAA (N8929) — Greeley, CO