Paraglider Crash in Puente Alto Injures Pilot and Passenger
A SkyWalk Join't 3 paraglider crashed into the ground near Las Vizcachas, Chile, on September 1, 2024. The pilot and passenger sustained serious spinal…
On November 15, 2024, a DEHAVILLAND DHC-6-300 (registration N241SA) operated by Grand Canyon Scenic Airlines was involved in an aviation accident near Boulder City, NV. No fatalities were reported. This summary draws on records from NTSB; 4 related events involving the same aircraft type or operator are linked below.

A De Havilland DHC-6-300, N241SA, was substantially damaged after departing the runway during a crosswind landing near Boulder City, Nevada, on November 15, 2024. All 16 occupants were uninjured.
A De Havilland DHC-6-300, N241SA, was substantially damaged after departing the runway during a crosswind landing near Boulder City, Nevada, on November 15, 2024. All 16 occupants were uninjured.
No fatalities were recorded in this accident.
The accident on 15 Nov 2024 involved a DEHAVILLAND DHC-6-300, registration N241SA, operated by Grand Canyon Scenic Airlines, at Boulder City, NV.
A SkyWalk Join't 3 paraglider crashed into the ground near Las Vizcachas, Chile, on September 1, 2024. The pilot and passenger sustained serious spinal…
A Cessna 172N struck electrical cables while on final approach to land at Aucó Aerodrome in Chile. The pilot was uninjured, but the aircraft sustained damage…
A Bombardier DHC-8-402 suffered a tail strike during landing at Puerto Williams on September 9, 2024. All 76 occupants were unharmed, but the aircraft…
A MYD JS-MD 3 glider veered off the runway and struck a wall at Vitacura Aerodrome on January 6, 2025. The pilot was uninjured, but the aircraft sustained…
A recreational paraglider flight in Puchuncaví, Chile, ended with the pilot sustaining serious injuries after a rapid descent and impact with a hillside on…
A Tecnam P2006T landed on its belly at an aerodrome in Poland after the crew failed to confirm landing gear deployment. The incident resulted in no injuries…