Fatal aircraft accident during agricultural spraying mission in Aberfoyle

1 fatality • Aberfoyle, Australia • Flight

A single-engine aircraft crashed during a low-altitude spraying operation in Aberfoyle, resulting in the death of the pilot.

What happened

During an aerial spraying operation conducted in the vicinity of Aberfoyle, an aircraft was operating at a low altitude when it suddenly became uncontrollable. The flight path transitioned into an uncontrolled dive, leading to a high-impact collision with the ground. The accident resulted in one fatality, involving the pilot of the aircraft.

Findings

Investigations into the crash determined that the aircraft experienced a catastrophic structural failure during the mission. Specifically, the loss of control was triggered by a wing strut fitting failure, which caused a wing to detach from the airframe while in flight.

Probable cause

The aircraft suffered a loss of control following the structural failure of a wing strut fitting.

Frequently asked questions

What happened in the 1964-07-09 De Havilland DHC-2 Beaver accident near Aberfoyle, Australia?

A single-engine aircraft crashed during a low-altitude spraying operation in Aberfoyle, resulting in the death of the pilot.

Were there any fatalities in the 1964-07-09 De Havilland DHC-2 Beaver accident?

The accident was fatal, resulting in 1 fatality.

What aircraft was involved and where did it happen?

The accident on 1964-07-09 involved a De Havilland DHC-2 Beaver, registration VH-AVR, operated by Aerial Agriculture, at Aberfoyle, Australia.

What was the probable cause of the accident?

The aircraft suffered a loss of control following the structural failure of a wing strut fitting.

Loading the flight search…