AN MD80 WAS DISPATCHED IN NON COMPLIANCE WITH #2 ENG ACCESSORY GEARBOX INCORRECT COVER INSTALLED DUE TO AN ERROR ON THE JOB CARD.

Narrative

ON JUL/FRI/00; I WAS ASSIGNED TO BUILD AN EHM GEARBOX (EXTRA HVY METAL; HVY ASSEMBLY GEARBOX USED ON JT8D-17 ENGS). DURING ASSEMBLY I INSTALLED A LIGHT COVER ON AN EHM HOUSING. THIS GEARBOX WAS INSTALLED ON ACFT XYZ #2 POS SERIAL NUMBER WVVX; ON JUL/WED/00; AT ZZZ. ON JUL/TUE/00; I WAS INFORMED THAT THIS ERROR WAS MADE. AT THAT TIME WE TOOK STEPS TO VERIFY THIS PROB AND INFORM THE COMPANY THAT THIS ERROR WAS MADE SO STEPS COULD BE TAKEN TO CORRECT IT. ACCORDING TO THE PAPERWORK ON THE GEARBOX COVER SOURCE NUMBER WAS XXX ASSIGN TO NUMBER WAS ABC WHICH WAS WRONG. XXX IS A LIGHT AND ABC IS AN EHM. THE XXX NUMBER WAS THE REASON IT WAS PULLED FROM THE RACK AND INSTALLED. CALLBACK CONVERSATION WITH RPTR REVEALED THE FOLLOWING INFO: THE RPTR STATED HE BUILT UP THE GEARBOX FOR A JT8D-17 ENG WHICH REQUIRES A HVY GEARBOX MATCHED WITH A HVY COVER. THE RPTR SAID HE HAD BUILT UP THE SAME HVY GEARBOX SEVERAL TIMES AND REALLY KNEW BETTER THAN TO INSTALL A LIGHT COVER. THE RPTR STATED THE JOB CARD PART NUMBER WAS IN ERROR AND THAT'S WHAT HE INSTALLED. THE RPTR SAID THE ENG WAS TRACKED DOWN AND REPLACED AND THE GEARBOX REMOVED FOR CORRECTIVE ACTION.