A B767-300ER ACFT INSPECTOR NOTES THE CONFUSING JOB CARD REQUIREMENTS FOR AN ENG COMPRESSOR BLEED VALVE VENTURI SENSOR BODY CRACK INSPECTION.

Narrative

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