No fatalities

28 Jul 2008: Cessna 150M — Phoenix, AZ

Phoenix, AZ, United States

On 28 Jul 2008, a Cessna 150M was involved in an aviation accident near Phoenix, AZ. No fatalities were reported. Investigators recorded the probable cause as: The student pilot's failure to maintain directional control during a touch-and-go landing. This summary draws on records from NTSB; 12 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 1778583330Data APIEditorial standards

A student pilot performing solo touch-and-go landings experienced a runway excursion when the airplane swerved left, crossed a taxiway, and the nose gear collapsed after heavy braking, resulting in substantial damage.

Accident Details

A student pilot reported that she had flown for 1 hour with her certified flight instructor (CFI) prior to the accident flight. After completing multiple takeoffs and touch-and-go landings, the CFI signed the student's logbook for solo flight and exited the airplane. The student pilot then completed an uneventful departure and touch-and-go landing.

Accident Sequence

The student pilot flew the airplane in the traffic pattern for a second time with the intention of performing another touch-and-go landing. During the landing roll, she reported retracting the flaps and applying full forward throttle and carburetor heat controls. The airplane then began to swerve left and departed the runway. The pilot attempted to correct the deviation, but the airplane continued the left turn and crossed over an adjacent taxiway. Concerned the airplane would collide with a ditch, she applied heavy brake pressure, at which point the nose gear collapsed.

Damage

During the accident sequence, the airplane sustained substantial damage to the left wing and firewall.

Contributing factors

Directional control — Not attained/maintained