No fatalities

18 Oct 2011: BEECH D17S — William Cutter — Phoenix, AZ

Phoenix, AZ, United States

On 18 Oct 2011, a BEECH D17S operated by William Cutter was involved in an aviation accident near Phoenix, AZ. No fatalities were reported. Investigators recorded the probable cause as: The pilot failed to extend the landing gear prior to landing. This summary draws on records from NTSB; 6 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 1778583330Data APIEditorial standards

A Beech D17S aircraft sustained wing damage after an unintentional landing with the landing gear in the retracted position.

What happened

On October 18, 2011, a BEECH D17S, registration N44562, was involved in an accident in Phoenix, Arizona, following a local area flight. During the landing phase, the pilot unintentionally touched down with the landing gear retracted. The aircraft sustained damage to the wing ribs during the event. There were no injuries resulting from the accident.

The investigation

A post-accident examination of the aircraft revealed substantial damage to the wing. The pilot reported that there were no mechanical malfunctions or failures prior to the impact that would have prevented the normal operation of the aircraft.

Probable cause

The pilot failed to extend the landing gear prior to landing.

Contributing factors

Not used/operatedPilot