Casualties unknown

Left Landing Gear Collapses During Taxi at Ramp (N401HW)

Monroe, NC, US

On September 19, 1983, a Cessna 401A (registration N401HW) was involved in an aviation accident near Monroe, NC. This summary draws on records from the U.S. National Transportation Safety Board (NTSB) historical archive.

Sourcesthe U.S. National Transportation Safety Board (NTSB) historical archivePrimary reportUpdated 2026-06-10Data APIEditorial standards

During taxi into the ramp, the left landing gear of an aircraft collapsed after a left turn. A flight instructor reported excessive taxi speed and observed the gear bending excessively before collapse.

Accident Overview

An aircraft experienced a left landing gear collapse while being taxied into the ramp area. According to the pilot, after turning left into the hub area, the landing gear warning horn sounded, and the left gear subsequently collapsed.

Witness Observations

A flight instructor who witnessed the accident stated that the aircraft's taxi speed seemed excessive. The instructor further reported observing the gear bending excessively prior to the collapse.

Post-Accident Inspection

During an inspection conducted by an FAA inspector, the landing gear reportedly showed evidence of having been subjected to heavy sideloading, similar to what might occur during a left turn.

Investigation report by the U.S. National Transportation Safety Board (NTSB) historical archive. Original record: https://carol.ntsb.gov/event/20001214X44439. This page is a structured re-presentation; facts and quotes are in the National Transportation Safety Board (NTSB), United States.