Casualties unknown

Ground Loop and Gear Failure During Landing Roll Out at Genesee County Airport (N7523D)

Batavia, NY, US

On May 17, 1985, a Piper PA-22-150 (registration N7523D) was involved in an aviation accident near Batavia, NY. This summary draws on records from the U.S. National Transportation Safety Board (NTSB) historical archive.

Sourcesthe U.S. National Transportation Safety Board (NTSB) historical archivePrimary reportUpdated 2026-06-10Data APIEditorial standards

During landing roll out at Genesee Co. Airport, a slight swerve was countered with right rudder. A northly gust caused a ground loop to the right; the left main gear strut failed in compression, folding the gear beneath the fuselage. Left wing tip and propeller struck runway.

Incident Overview

A commercial-rated flight instructor departed Genesee County Airport and flew a standard traffic pattern for landing. The pilot observed the wind sock and noted some gusty conditions. The landing was to the west.

Landing and Ground Loop

During the landing roll out, the aircraft experienced a slight swerve to the south. The pilot applied right rudder to correct the swerve. At that time, a northly wind gust was encountered, causing the aircraft to ground loop to the right.

Structural Failure

Simultaneously, the left main landing gear strut failed in compression. This failure allowed the left gear to fold beneath the fuselage. The left wing tip and the propeller then contacted the runway surface.

Subsequent Actions

The report does not specify any further details regarding injuries, damage extent, or post-accident procedures.

Investigation report by the U.S. National Transportation Safety Board (NTSB) historical archive. Original record: https://carol.ntsb.gov/event/20001214X36593. This page is a structured re-presentation; facts and quotes are in the National Transportation Safety Board (NTSB), United States.