Casualties unknown

1988-10-08: Cessna 177 (N29550) — William Bee King — Greensboro, NC

Greensboro, NC, US

On October 8, 1988, a Cessna 177 (registration N29550) operated by William Bee King was involved in an aviation accident near Greensboro, NC. This summary draws on records from the U.S. National Transportation Safety Board (NTSB) historical archive.

Sourcesthe U.S. National Transportation Safety Board (NTSB) historical archivePrimary reportUpdated 1781061362Data APIEditorial standards

A pilot landing on runway 35 at Southeast Greensboro became airborne after touchdown, then collided with a pine tree. The pilot reported gusty wind and the downsloped runway contributed to the event.

Report Details

The pilot had landed at Southeast Greensboro earlier and subsequently departed on runway 35, remaining in the traffic pattern for another landing. The touchdown occurred within the first 100 feet of the downsloped runway at an estimated speed of 70 miles per hour. After touchdown, the flaps were retracted.

Pilot Statement

The pilot reported that a gust of wind and the downsloped runway caused the airplane to become airborne again. Control inputs intended to correct a drift were ineffective. The aircraft subsequently collided with a pine tree located approximately 50 feet from the edge of the runway.

Regulatory Note

The U.S. Government flight information publication for Southeast Greensboro indicates that practice landings are not permitted on runway 35.

Weather Conditions

The nearest weather reporting facility, located 15 nautical miles northwest of the airport, recorded wind from 220 degrees at 2 knots approximately 10 minutes before the accident.

Investigation report by the U.S. National Transportation Safety Board (NTSB) historical archive. Original record: https://carol.ntsb.gov/event/20001213X26983. This page is a structured re-presentation; facts and quotes are in the National Transportation Safety Board (NTSB), United States.