FlightFinder
Check my flight
Casualties unknown

Pilot Reports Landing on Runway 13, Aircraft Strikes Obstacles and Comes to Rest Inverted (N5464A)

Lumberton, NC, US

On January 11, 1995, a Cessna P210R (registration N5464A) was involved in an aviation accident near Lumberton, NC. Investigators recorded the probable cause as: THE FAILURE OF THE PILOT TO MAINTAIN AIRCRAFT CONTROL DURING THE APPROACH FOR LANDING, RESULTING IN A COLLISION WITH OBJECTS. This summary draws on records from the U.S. National Transportation Safety Board (NTSB) historical archive.

Sourcesthe U.S. National Transportation Safety Board (NTSB) historical archivePrimary reportUpdated 2026-07-04Data APIEditorial standards

A 73-year-old commercial pilot reported landing on runway 13 but did not turn onto final; the aircraft struck a utility pole, buildings, and vehicles before coming to rest inverted. No mechanical failure found; pilot could not recall events.

Accident Overview

A 73-year-old commercial pilot was landing at an airport, having reported on UNICOM his intention to land on runway 13. No further communications were received from the aircraft. Witnesses observed the airplane on a left base leg for runway 13, but it did not execute a turn onto final approach. The aircraft continued descending and subsequently struck a utility pole, some buildings, and several vehicles before coming to rest inverted.

Aircraft Condition

After the accident, the landing gear were found extended, while the flaps were retracted. Examination of the propeller blades indicated that the engine was producing power at the time of impact. A thorough inspection of the airframe and powerplant revealed no evidence of any mechanical malfunction or failure.

Pilot Statement

The pilot, who was interviewed after the accident, stated that he could not recall the events surrounding the occurrence.

Loss of control in flight

Frequently asked questions

What happened in the 11 Jan 1995 Cessna P210R accident near Lumberton, NC?

A 73-year-old commercial pilot reported landing on runway 13 but did not turn onto final; the aircraft struck a utility pole, buildings, and vehicles before coming to rest inverted. No mechanical failure found; pilot could not recall events.

What aircraft was involved and where did it happen?

The accident on 11 Jan 1995 involved a Cessna P210R, registration N5464A, at Lumberton, NC.

What was the probable cause of the accident?

THE FAILURE OF THE PILOT TO MAINTAIN AIRCRAFT CONTROL DURING THE APPROACH FOR LANDING, RESULTING IN A COLLISION WITH OBJECTS.

More accident analyses

Investigation report by the U.S. National Transportation Safety Board (NTSB) historical archive. Original record: https://carol.ntsb.gov/event/20001207X02820. This page is a structured re-presentation; facts and quotes are in the National Transportation Safety Board (NTSB), United States.