Incident Details
According to the pilot, the accident occurred during final approach. The flaps were fully extended, and there were no wind conditions. Upon touchdown, the airplane floated and then bounced. After the bounce, the airplane touched down on the right main landing gear and began to drift off the left side of the runway. The pilot momentarily applied power and right rudder in an attempt to correct the drift, but the airplane continued off the runway. He then reduced power and applied the brakes, but was unable to stop the airplane before it struck cleared brush off the runway surface. The impact caused the airplane to nose over.
Physical Evidence
An inspection of the runway surface revealed a tire mark originating from the right main landing gear, located to the left of the runway centerline. This mark curved in an arc toward the left side of the runway. Just before the left edge of the runway, an additional tire mark from the left main landing gear appeared. Both main landing gear tires left marks in the grass adjacent to the runway.