No fatalities

Cessna 180 H accident at Hanksville, UT, 6 May 2020

Hanksville, UT, United States

On May 6, 2020, a Cessna 180 H was involved in an aviation accident near Hanksville, UT. No fatalities were reported. Investigators recorded the probable cause as: The pilot's failure to maintain directional control during the takeoff roll, which resulted in a runway excursion and ground-loop. This summary draws on records from NTSB; 12 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 2026-08-03Data APIEditorial standards

Probable cause

The pilot's failure to maintain directional control during the takeoff roll, which resulted in a runway excursion and ground-loop.

— NTSB Determination

Contributing factors

Directional control — Not attained/maintainedPilot

Frequently asked questions

What happened in the 6 May 2020 Cessna 180 H accident near Hanksville, UT?

The pilot's failure to maintain directional control during the takeoff roll, which resulted in a runway excursion and ground-loop.

Were there any fatalities in the 6 May 2020 Cessna 180 H accident?

No fatalities were recorded in this accident.

What aircraft was involved and where did it happen?

The accident on 6 May 2020 involved a Cessna 180 H, at Hanksville, UT.

What was the probable cause of the accident?

The pilot's failure to maintain directional control during the takeoff roll, which resulted in a runway excursion and ground-loop.