No fatalities

CESSNA 180J accident at Buffalo, WY, 6 May 2021

Buffalo, WY, United States

On May 6, 2021, a CESSNA 180J operated by Air Craft LLC was involved in an aviation accident near Buffalo, WY. No fatalities were reported. Investigators recorded the probable cause as: The pilot’s failure to maintain directional control during the takeoff roll, which resulted in a ground loop and collision with terrain. This summary draws on records from NTSB; 12 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 2026-08-03Data APIEditorial standards

Probable cause

The pilot’s failure to maintain directional control during the takeoff roll, which resulted in a ground loop and collision with terrain.

— NTSB Determination

Contributing factors

PilotDirectional control — Not attained/maintained

Frequently asked questions

What happened in the 6 May 2021 CESSNA 180J accident near Buffalo, WY?

The pilot’s failure to maintain directional control during the takeoff roll, which resulted in a ground loop and collision with terrain.

Were there any fatalities in the 6 May 2021 CESSNA 180J accident?

No fatalities were recorded in this accident.

What aircraft was involved and where did it happen?

The accident on 6 May 2021 involved a CESSNA 180J, operated by Air Craft LLC, at Buffalo, WY.

What was the probable cause of the accident?

The pilot’s failure to maintain directional control during the takeoff roll, which resulted in a ground loop and collision with terrain.