Ultralight Crash in Chonburi Kills Pilot Due to Wing Fabric Failure
An X-AIR HAWK ultralight crashed in Chonburi, Thailand, killing the pilot and injuring a passenger. The accident was caused by deteriorated wing fabric and…
No fatalities
BEECH M35 accident at Osage Beach, MO, 17 Sept 2021
On September 17, 2021, a BEECH M35 operated by WEIDNER LEONARD M was involved in an aviation accident near Osage Beach, MO. No fatalities were reported. Investigators recorded the probable cause as: The pilot and flight instructor’s failure to ensure that the landing gear were extended prior to landing. This summary draws on records from NTSB; 7 related events involving the same aircraft type or operator are linked below.
Probable cause
The pilot and flight instructor’s failure to ensure that the landing gear were extended prior to landing.
— NTSB Determination
Contributing factors
PilotInstructor/check pilotNot used/operated
More accident analyses
Ultralight Aircraft Excurses Runway at Pai Airport After Crosswind Gust
A Challenger II Special ultralight aircraft (U-B23) landed off-runway at Pai Airport, Mae Hong Son, on September 17, 2024, due to a gust of wind. No injuries…
PKBWL Investigating Serious Incident Involving AT-3R100
The Polish aviation safety authority is investigating a serious incident involving an AT-3R100 aircraft that occurred on September 2, 2024. The investigation…
Glider wing strike during low approach at Kruszyn airfield
A SZD-48-3 glider suffered damage when its left wing struck a ground obstacle during a low final approach at EPWK on June 20, 2025. The pilot was uninjured.
Fatal skydiving accident in Leszno involving a Crossfire 3-119
A 39-year-old skydiver died after a hard landing near Leszno on May 1, 2026. The PKBWL preliminary report indicates the fatal impact resulted from a late,…
Student Pilot Crash at Krosno Aerodrome Involving SZD-50-3 Puchacz
A student pilot crashed an SZD-50-3 Puchacz glider into the airfield fence during a solo training flight on June 6, 2026. The pilot was uninjured, but the…