On February 3, 2024, an Airbus A320-232 (registration LY-NVL) was involved in an aviation accident near Vilnius International Airport, Lithuania, LT. This summary draws on records from the Transport Accident and Incident Investigation Service of Lithuania (TAITS).
An Airbus A320-232 (LY-NVL) veered off the runway upon landing at Vilnius International Airport on February 3, 2024. The aircraft sustained substantial damage but no injuries were reported among the crew or passengers.
What happened
On 3 February 2024, an Airbus A320-232 with registration LY-NVL was conducting a landing operation at Vilnius International Airport. Upon touchdown and during the rollout phase, the aircraft departed from the paved runway surface, entering the grassy area adjacent to the airfield.
After traveling a short distance off the pavement, the aircraft managed to return to the runway surface. It then proceeded to taxi under its own power to the apron for parking. There were no injuries reported among the crew or passengers on board. However, the aircraft sustained substantial damage as a result of the incident.
An X-AIR HAWK ultralight crashed in Chonburi, Thailand, killing the pilot and injuring a passenger. The accident was caused by deteriorated wing fabric and…
A Challenger II Special ultralight aircraft (U-B23) landed off-runway at Pai Airport, Mae Hong Son, on September 17, 2024, due to a gust of wind. No injuries…
The Polish aviation safety authority is investigating a serious incident involving an AT-3R100 aircraft that occurred on September 2, 2024. The investigation…
A SZD-48-3 glider suffered damage when its left wing struck a ground obstacle during a low final approach at EPWK on June 20, 2025. The pilot was uninjured.
A 39-year-old skydiver died after a hard landing near Leszno on May 1, 2026. The PKBWL preliminary report indicates the fatal impact resulted from a late,…
A student pilot crashed an SZD-50-3 Puchacz glider into the airfield fence during a solo training flight on June 6, 2026. The pilot was uninjured, but the…