Casualties unknown

Aircraft Stalls and Spins During Go-Around After Simulated Engine Failure (N94336)

Fairfax, VT, US

On December 30, 1986, a Cessna 152 (registration N94336) was involved in an aviation accident near Fairfax, VT. This summary draws on records from the U.S. National Transportation Safety Board (NTSB) historical archive; 8 related events involving the same aircraft type or operator are linked below.

Sourcesthe U.S. National Transportation Safety Board (NTSB) historical archivePrimary reportUpdated 2026-07-04Data APIEditorial standards

During a simulated engine failure training flight, the aircraft stalled and spun after a go-around was initiated at 200 feet AGL.

Incident Overview

A certified flight instructor (CFI) reported that he had initiated a simulated engine failure for a student pilot. The student responded properly to the simulated emergency and aligned the aircraft on an approach to a field.

Go-Around Maneuver

At an altitude of 200 feet above ground level (AGL), the student was instructed to execute a go-around. Full power was applied, and carburetor heat was removed. The flaps were raised to the takeoff setting. The aircraft stabilized but would not climb.

Loss of Control

The CFI took control of the aircraft. Shortly thereafter, the aircraft stalled and spun into the field.

All Cessna 152 accidents →

Frequently asked questions

What happened in the 30 Dec 1986 Cessna 152 accident near Fairfax, VT?

During a simulated engine failure training flight, the aircraft stalled and spun after a go-around was initiated at 200 feet AGL.

What aircraft was involved and where did it happen?

The accident on 30 Dec 1986 involved a Cessna 152, registration N94336, at Fairfax, VT.

Investigation report by the U.S. National Transportation Safety Board (NTSB) historical archive. Original record: https://carol.ntsb.gov/event/20001213X35431. This page is a structured re-presentation; facts and quotes are in the National Transportation Safety Board (NTSB), United States.