Casualties unknown

2006-08-22: Eurocopter France AS350 B2 (C-FYUN) — Prism Helicopters Ltd — Nuiqsut, AK

Nuiqsut, AK, US

On August 22, 2006, an Eurocopter France AS350 B2 (registration C-FYUN) operated by Prism Helicopters Ltd was involved in an aviation accident near Nuiqsut, AK. Investigators recorded the probable cause as: The pilot's failure to maintain clearance from the sling load during cruise flight, which resulted in the load becoming entangled in the tail rotor, and an in-flight loss of control. This summary draws on records from the U.S. National Transportation Safety Board (NTSB) historical archive; 3 related events involving the same aircraft type or operator are linked below.

Sourcesthe U.S. National Transportation Safety Board (NTSB) historical archivePrimary reportUpdated 1781061362Data APIEditorial standards

A commercial helicopter on a public use flight crashed into a shallow lake while retrieving an external sling load. The tail boom separated; rope fibers from the cargo net were found on the tail rotor blade.

Incident Summary

A commercial certificated helicopter pilot was dispatched to a remote research site, about 40 miles northeast of the base camp, to retrieve an external sling load. The helicopter was operated under contract to the U.S. government as a public use flight under Title 14, CFR Part 91. The helicopter departed the base camp in the early evening and did not return. There were no communications with the pilot, and weather conditions precluded a search until late the next morning. The wreckage was located near the shore of a shallow lake, in several feet of water, about 1 mile south of the remote research site. There were no ground scars around the lake's perimeter. The external sling load was at the accident site. The helicopter was equipped for satellite flight following, and the track showed no unusual characteristics from the base camp to the remote research site, nor from the research site to the accident site.

Prior to departing the base camp for the research site, the helicopter had recently returned from the research site with a passenger. Both the pilot and passenger told the camp manager that weather conditions at the research site were marginal and deteriorating. The passenger reported that typically from early evening to late morning, fog and low clouds blanketed the area. The pilot was asked to retrieve the load if possible, but not to take any chances.

Examination Findings

The helicopter was examined at the accident site and re-examined after recovery. All components were accounted for; however, the tail boom had separated from the fuselage and lay farther out in the lake. The cabin had the appearance of having tumbled, but the tail boom did not. The external load was located in the lake between the tail boom and the fuselage. Examinations of the helicopter and its components established control continuity and did not reveal any preaccident mechanical anomalies.

The helicopter's external load lifting gear revealed damage to the airframe attaching brackets and supporting cable attachments. The sling load had damage to both the cargo net and the net's cinch ropes. The cargo net was made of white rope containing a black trace and had several broken ropes that were not there prior to the accident flight. The net's cinch rope, which was yellow with a blue trace, had been pulled apart at a spliced thimble. During an examination of the tail rotor tracking blade, blue rope fibers consistent with the blue trace fibers of the net's cinch rope were found trapped under the blade's end cap bolt. Both the tail boom and the tail rotor blades had rope marks in their paint.

Grounding

No probable cause is stated in the source.

Investigation report by the U.S. National Transportation Safety Board (NTSB) historical archive. Original record: https://carol.ntsb.gov/event/20060905X01290. This page is a structured re-presentation; facts and quotes are in the National Transportation Safety Board (NTSB), United States.