No fatalities

Cessna 172 wing strike during taxi at Anchorage

Anchorge, AK, United States

On May 3, 2008, a Cessna 172 operated by Byron Brown was involved in an aviation accident near Anchorge, AK. No fatalities were reported. Investigators recorded the probable cause as: The pilot failed to maintain adequate clearance from a road sign during taxi operations following landing. This summary draws on records from NTSB; 12 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 2026-08-03Data APIEditorial standards

A private pilot accidentally struck a stop sign with the wing of a Cessna 172 while taxiing after landing in Anchorage, Alaska.

What happened

On May 3, 2008, a Cessna 172, registration N7886G, was taxiing after landing at an airport in Anchorage, AK. During the taxi, the pilot inadvertently turned onto a roadway. While attempting to perform a 180-degree turn to reverse the aircraft's direction, the right wing of the airplane struck a stop sign.

There were no injuries resulting from the incident. The impact caused structural damage to the right wing end rib of the aircraft.

Probable cause

The pilot failed to maintain adequate clearance from a road sign during taxi operations following landing.

Contributing factors

Causes

Pilot

Other contributing factors

Sign/marker

All Cessna 172 accidents →

Frequently asked questions

What happened in the 3 May 2008 Cessna 172 accident near Anchorge, AK?

A private pilot accidentally struck a stop sign with the wing of a Cessna 172 while taxiing after landing in Anchorage, Alaska.

Were there any fatalities in the 3 May 2008 Cessna 172 accident?

No fatalities were recorded in this accident.

What aircraft was involved and where did it happen?

The accident on 3 May 2008 involved a Cessna 172, operated by Byron Brown, at Anchorge, AK.

What was the probable cause of the accident?

The pilot failed to maintain adequate clearance from a road sign during taxi operations following landing.