No fatalities

2 Mar 2016: CESSNA 195 — Clinton, AR

Clinton, AR, United States

On 2 Mar 2016, a CESSNA 195 was involved in an aviation accident near Clinton, AR. No fatalities were reported. Investigators recorded the probable cause as: The pilot's failure to maintain direction control during the landing roll, which resulted in runway excursion, and collision with a fence. This summary draws on records from NTSB; 12 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 1778583330Data APIEditorial standards

A tailwheel airplane veered off the runway and ground looped during landing roll in gusty wind. The pilot reported insufficient back pressure to lock the tailwheel steering, despite applying full right rudder and right brake. The airplane sustained substantial fuselage damage after sliding into a fence.

Accident Details

During the landing roll in gusty wind conditions, a tailwheel-equipped airplane veered off the runway to the left. The pilot reported that he was "standing" on the right brake with full right rudder applied, but did not apply enough back pressure to enable the tailwheel steering to lock. As a result, the airplane ground looped and slid into a fence, resulting in substantial damage to the fuselage.

Pilot Statement

According to the pilot, there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation. The pilot's actions during the landing roll were consistent with attempting to correct the veer, but the lack of locked tailwheel steering prevented effective directional control.

Damage Assessment

The accident caused substantial damage to the fuselage of the airplane. No other damage or injuries were reported in the source.

Contributing factors

Directional control — Not attained/maintainedPilot