No fatalities

Touch-and-Go Landing Results in Gear Retraction and Runway Skid

Broomfield, CO, United States

On November 9, 2019, a Beech 55 95C55 operated by Bhl Aviation Llc was involved in an aviation accident near Broomfield, CO. No fatalities were reported. Investigators recorded the probable cause as: The pilot's unintentional retraction of the landing gear during the landing roll. This summary draws on records from NTSB; 11 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 2026-08-03Data APIEditorial standards

During a multi-engine check ride, a pilot mistakenly retracted the landing gear during a touch-and-go landing, causing the airplane to skid and sustain substantial fuselage damage.

Accident Synopsis

During a multi-engine check ride, a pilot inadvertently retracted the landing gear while attempting a touch-and-go landing. The airplane skidded down the runway and came to rest at a taxi intersection, resulting in substantial damage to the fuselage.

Sequence of Events

The pilot, who held a single-engine rating, was undergoing a multi-engine check ride with a flight examiner. The examiner requested several touch-and-go landings to assess the pilot's proficiency. During the landing roll of one such touch-and-go, the pilot mistakenly retracted the landing gear instead of performing the intended action. The airplane then skidded along the right side of the runway before coming to rest at a taxi intersection.

Damage and Findings

The accident caused substantial damage to the fuselage. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Contributing factors

Unintentional use/operationPilot