1 fatality

15 May 2008: Cessna 210L — Edsal Pty Ltd — Abingdon Downs, Australia

Abingdon Downs, Australia

On 15 May 2008, a Cessna 210L operated by Edsal Pty Ltd was involved in an aviation accident near Abingdon Downs, Australia. One person was killed. This summary draws on records from NTSB; 12 related events involving the same aircraft type or operator are linked below.

SourcesNTSBPrimary reportUpdated 1778583330Data APIEditorial standards

On May 15, 2008, a Cessna 210L (VH-IDM) conducting an aerial survey struck terrain near Abingdon Downs, Queensland. The sole pilot was killed. The Australian Transport Safety Bureau is investigating.

Accident

On May 15, 2008, at approximately 1200 coordinated universal time (UTC), a Cessna 210L, Australian registration VH-IDM, collided with terrain near Abingdon Downs, Queensland, Australia. The airplane had departed from Karumba, Australia, for an aerial survey flight. It was reported that the aircraft failed to return as expected. The pilot, who was the sole occupant of the aircraft, was killed.

Investigation

The investigation is under the jurisdiction of the Australian government. This report is for information purposes only and contains only information released by the Australian Transport Safety Bureau (ATSB). Further information pertaining to this accident may be obtained from the ATSB.

Aircraft Information

The Cessna 210L, registered as VH-IDM, was a single-engine aircraft. No further details about the aircraft or its maintenance history were provided in the initial report.

Pilot Information

The report did not specify any details about the pilot, such as experience or qualifications.

Sequence of Events

The flight departed from Karumba for an aerial survey mission. When the aircraft did not return as expected, it was reported missing. The accident site was located near Abingdon Downs, Queensland. The collision with terrain occurred at about 1200 UTC.