Aircraft collision with snow removal vehicle at Moncton Airport

No fatalities • Moncton, Canada • Landing (descent or approach)

An aircraft collided with a snow plough on a closed runway at Moncton Airport, resulting in injuries and the loss of the aircraft.

What happened

During operations at Moncton Airport, an aircraft made contact with a snow removal vehicle following its arrival on runway 29. The incident occurred immediately after the plane had touched down on the runway surface. The impact between the moving aircraft and the plough resulted in the vehicle and the plane coming to a complete stop.

As a result of the collision, there were two injuries reported: one sustained by the pilot and another by the driver of the snow plough. The captain remained unharmed during the event. Due to the severity of the impact, the aircraft was declared a total loss and was damaged beyond repair.

Findings

Investigations into the collision revealed that the primary factor involved the use of an unauthorized runway. It was concluded that the crew landed on a runway that had been closed to traffic to allow for ongoing snow removal operations.

Probable cause

The flight crew performed a landing on a runway that was not active due to ongoing snow clearance procedures.

Frequently asked questions

What happened in the 1961-04-15 Douglas C-47 Skytrain (DC-3) accident near Moncton, Canada?

An aircraft collided with a snow plough on a closed runway at Moncton Airport, resulting in injuries and the loss of the aircraft.

Were there any fatalities in the 1961-04-15 Douglas C-47 Skytrain (DC-3) accident?

No fatalities were recorded in this accident.

What aircraft was involved and where did it happen?

The accident on 1961-04-15 involved a Douglas C-47 Skytrain (DC-3), registration CF-FKQ, operated by Maritime Central Airways, at Moncton, Canada.

What was the probable cause of the accident?

The flight crew performed a landing on a runway that was not active due to ongoing snow clearance procedures.

Loading the flight search…